Autodesk Supports U.S. DOT Smart City Challenge

by: Bobby del Rosario | 03/11/2016
Estimated Reading time: 5 - 8 minutes

On March 7th, U.S. Transportation Secretary Anthony Foxx announced that the U.S. Department of Transportation (USDOT) received the support of Autodesk for the Department’s Smart City Challenge – a competition which will create a fully integrated, first-of-its-kind city that uses data, technology and creativity to shape how people and goods move in the future.  To support the Smart City Challenge, each of the five finalist cities will each receive complimentary access to Autodesk InfraWorks 360 and training and technical support to help define their vision during the final stage of the competition and beyond.

In the USDOT’s announcement, Autodesk President and CEO Carl Bass is quoted: “With climate change, increasing urban populations and crumbling infrastructure facing our cities, Secretary Foxx’s Smart City Challenge comes at a great time…The focus of the challenge mirrors Autodesk’s vision to imagine, design and create a better world, and we are proud to support the finalist cities to bring their designs into an achievable, data-driven reality.”

The USDOT and Autodesk provided The Atlantic CityLab’s Eric Jaffe an exclusive of the announcement.  Below is his article:


 

A $50 Million Plan to Get Cities Thinking About Driverless Cars

DOT’s Smart City Challenge hopes to jumpstart a discussion that’s been delayed for too long.

Given all the advances being made in driverless cars, America’s cities have been startlingly slow to incorporate the technology into their plans. A recent analysis found that, as of mid-2013, just one of the 25 largest U.S. metropolitan planning organizations bothered to mention autonomous vehicles in its long-term outlook—that single nod coming in a brief sidebar. But dangle up to $50 million out there for a futuristic transport vision and it’s amazing how quickly things change.

The U.S. Department of Transportation did just that in December when it announced the Smart City Challenge, an urban innovation contest that asked midsized metros to draw up ideas for improving safety and mobility with driverless cars, intelligent infrastructure, street sensors, and the like. Since then 78 cities have applied, with DOT set to narrow the field to five finalists this Saturday at South by Southwest. The winner will be named in June.

“I think there was pent-up energy at the city level for a chance to define the future,” Transportation Secretary Anthony Foxx tells CityLab. “That’s what we’re giving these cities.”

Foxx says the goal of the challenge is to produce not just conceptual outlines but “real models” at work in an urban environment. To that end, DOT will announce a new contest partnership today with the infrastructure software giant Autodesk. As they refine their proposals, the finalists will get access to (and training on) InfraWorks 360, a “building information modeling” platform that uses 3-D visualizations and real-world data to plan major engineering projects. 

“Their system is able to create 20 different versions of the same thing and help you figure out which of those versions makes the most sense,” says Foxx. “What they bring is … the capability to design a concept on a computer and to actually see how well it works. To scope it, to figure out what inputs you need, to figure out what changes you need to make before you spend a lot of money putting something on the ground.”

InfraWorks 360 has been used for a number of major civil infrastructure projects, including Denver International Airport’s new hotel and transit hub. Washington, D.C., recently used the program to model how energy retrofits or green roofs could help the city meet its sustainability targets. Theo Agelopoulos of Autodesk says InfraWorks 360 is particularly handy in selling complicated projects to the public—producing vivid designs and hard figures that simplify the discussion.

“The ability to create a model attached to their cost-benefit analysis, run a bunch of different scenarios, and optimize which project the city should basically pick—that provides the most benefit to the constituents,” Agelopoulos says. “More and more cities, in light of funding challenges, want to make better decisions.”

Jim Lynch, the vice president of the building products group at Autodesk, says InfraWorks 360 is “extremely relevant” to the Smart City Challenge because it can model futuristic transportation scenarios onto existing urban environments. In addition to multimodal traffic simulations, says Lynch, the program can consider the impact of driverless cars and intelligent sensors on local mobility. It “ultimately helps city planners show and tell multiple design ideas and iterations,” he says.

The winning city will get a year-long subscription to InfraWorks 360, as well as on-site training. Other contest partners include Vulcan Inc., which may award up to $10 million on top of DOT’s base prize of $40 million, and Mobileye, which will provide driver-assistance technology to city buses. Every applicant city must have an “established public transportation system”—a recognition by DOT that urban mobility will benefit if driverless cars and transit work together, not at odds.

SmartCity2

An InfraWorks 360 planning visualization of Miami. (Autodesk)

DOT emphasized the need to increase travel choices in its 30-year “Beyond Traffic” plan from early 2015. While that progressive vision outlined a multimodal future for urban America, the federal transportation bill passed by Congress in December largely stuck to the same highway-heavy funding script the country has followed for decades. But a subsequent budget plan urged a new direction for local planning, one that involved large-scale testing of driverless technology.

The Smart City Challenge offers midsized metros the chance to “embrace these innovations as they come online,” says Foxx, and to support sweeping ideas with “actual implementation plans.” The fact that few cities have done such planning on their own was one of the “driving forces behind this challenge,” he says. “Part of this challenge is really nudging our cities, our incubators of innovation and ideas, to imagine how they may use this technology, not just 30 years from now but today.”


For information about Autodesk InfraWorks 360, visit the product center.  And, you can follow Autodesk InfraWorks 360 on Facebook and Twitter.

Rate this post:
1 Star2 Stars3 Stars4 Stars5 Stars (2 votes, average: 5.00 out of 5)
Loading...






0 comments